Equipment Trailers for Sale

What Makes an Equipment Trailer

Equipment trailers use heavier frame steel, closer cross-member spacing, and stronger axles than utility trailers to support concentrated point loads from machinery tracks and wheels. Most are tilt or deckover designs with heavy-duty fold-down or spring-loaded ramps and a low load angle so tracked machines climb aboard without high-centering.

Matching GVWR to Your Machine

Weigh your heaviest machine plus any attachments, then add 20% for fuel, tools and future growth. Pick a trailer whose GVWR exceeds that number. A 7,000 lb GVWR deck handles a compact tractor; 14,000–17,000 lb covers most skid steers and mini-excavators; 20,000+ lb is needed for large tractors and loaded attachments.

Tilt vs. Deckover vs. Lowboy

Tilt trailers tilt the deck to ground level for a near-zero load angle — best for low-clearance machines. Deckover trailers sit above the wheels for a wider, full-width deck but a higher load angle. Lowboy equipment trailers drop the deck between the wheels for the lowest possible load height on heavy loads.

Critical Features

• Spring-assist ramps — heavy ramps are dangerous to lift manually; assist makes them manageable.
• Stake pockets and D-rings — for chaining down machinery at four points.
• Sealed bearings and electric brakes on all axles — required for safe heavy hauling.
• Adjustable coupler and jack — for uneven ground at job sites.